The Importance of Quality Automotive Fasteners
May 26, 2023Machine Tool Measurement Assures Quality On Custom Milling Machine
Apr 22, 2023Localized corrosion and repassivation behaviors of additively manufactured titanium alloys in simulated biomedical solutions
Apr 16, 2023Functional 2D
Apr 14, 2023This Jewish Prayer Is a Balm for Those With Chronic Illness
Apr 12, 2023Mythos 3D
Using additive manufacturing to "print" road and mountain bike stems out of 6/4 titanium powder, the Mythos stems use a uniquely open design based on the real-world stresses stems face.
Offered in two models -the road ELIX, and the mountain bike IXO- Mythos's stems are designed in house in the UK, then printed by METRON Advanced Equipment for them. They say the stems are both torsionally stiffer and stiffer in bending compared to an equivalent alloy stem.
" data-src="https://bikerumor.com/wp-content/uploads/2022/12/Mythos-3D-printed-MTB-Stem-3.jpg" alt="mythos ixo 3d printed titanium mountain bike stem" width="2500" height="1668">
The IXO, shown above, comes in 40mm and 50mm lengths (£250 incl. VAT) with 0º rise and a 38mm stack height with a no-gap faceplate. Weight from 147g with ti hardware, they say it's 16% stiffer torsionally and 11% stiffer in bending.
" data-src="https://bikerumor.com/wp-content/uploads/2022/12/mythos-elix-3d-printed-titanium-road-bike-stem.jpg" alt="mythos elix titanium 3d printed road bike stem" width="921" height="682">
The ELIX (above, £500 incl. VAT) road bike stem is made from Scalmalloy, which is a mix of Scandium, Aluminum, and Magnesium and is a substitute for 7000-series aluminum and is stronger than titanium. It comes in 100/110/120/130mm lengths with a +/-8º rise. It comes in three finishes and weighs as little as 150g including titanium hardware. They say it's 15% stiffer torsionally, but has the same bending stiffness as a good alloy stem.
" data-src="https://bikerumor.com/wp-content/uploads/2022/12/Mythos-3D-printed-MTB-Stem-4.jpg" alt="mythos ixo 3d printed titanium mountain bike stem" width="1600" height="1068">
The stems use SLM Additive manufacturing, which essentially melts metal powder into a solid, layer by layer, to create a finished part.
" data-src="https://bikerumor.com/wp-content/uploads/2022/12/Mythos-3D-printed-MTB-Stem-1.jpg" alt="mythos ixo 3d printed titanium mountain bike stem" width="1000" height="1499">
The ELIX road bike stems are available now, and pre-orders are open for the MTB stems.
Mythos.bike